PRODUCTS CENTER


Mauritania Retrofit For Inge Dizzer 5000plus WR

Fluoro-Pure DFPES700B-50 Ultrafiltration module is an economical replacement for Inge dizzer XL 5000plus WR(p/n: VK-0094) with compatible dimensions, it can well fit into Inge dizzer UF skid without the need to modify piping and fittings, it can be operated in both cross flow and dead-end mode.

Product Description

Fluoro-Pure DFPES700B-50 Ultrafiltration module is an economical replacement for Inge dizzer XL 5000plus WR(p/n: VK-0094) with compatible dimensions, it can well fit into Inge dizzer UF skid without the need to modify piping and fittings, it can be operated in both cross flow and dead-end mode.

With 0.02μm pore size, DFPES700B-50 can effectively retain particles, bacteria and virus and produce clean water which makes is suitable for drinking water treatment, pre-treatment for reverse osmosis, industrial wastewater treatment etc.

Features

    ● 0.02μm pore size produces high quality filtrate

    ● Direct replacement for Inge dizzer XL VK-0094

    ● Inside-out flow, no air scour needed

    ● Excellent chemical resistance

    ● Typical permeate SDI<3, turbidity <0.1NTU

 

Model DFPES700B-50
Specification Membrane material PES
Housing material UPVC
Pore size(μm) 0.02
Membrane area(m2) 50
Overall length with end caps(mm) 1,680
Module diameter(mm) 250
Feed/Filtrate port 2'' Victaulic
Potting material Epoxy resin
Operation parameter Max.chlorine concentration(ppm) 200
pH range during operation 2 - 11
pH range during cleaning 1 - 13
Max backwash pressure(Mpa) 0.2
Max feed pressure(Mpa) 0.5
Trans-membrane pressure 0.1-2 bar
Max working temperature 40
Design flux(LMH) 50 - 120