PRODUCTS CENTER
Mauritania 3M Liqui-Cel G521R Retrofit
Category:
Product Description
Delta Filtration degassing membrane contactor DFMC6x28 model has 50㎡ filtration area which produces flow rate range 1~10m³/hr, it can work as 1:1 replacement for 3M Liqui-Cel G521R EXF-6x28 degassing membrane module. Microporous hollow fiber with naturally hydrophobic feature can effectively retain CO2, the modules can be installed either by parallel or series according to project requirement.
Typical features:
● Polypropylene membrane with high hydrophobicity
● Plug and play installation
● ABS housing
● Direct replacement for 3M Liqui-Cel
Specification
| Model | DFMC6x28 |
| Dimensions(mm) | φ166x1010mm |
| Flow range | 1 - 11m³/hr |
| Membrane material | Polypropylene(PP) |
| Membrane housing | ABS |
| Potting material | Epoxy resin |
| Membrane area | 50㎡ |
| Seal material | EPDM / Viton |
| Connection(liquid) | 50A JIS |
| Connection(vacuum) | 25A JIS |
| Working pressure(Shellside) | 5-35℃@0.6MPa 50℃@0.2MPa |
| Working pressure(Lumenside) | 25℃@0.4MPa |
Feed Water Quality Recommendation
| Indicator | Suggested value |
| Colloids(SDI) | <3 |
| Turbidity | <0.5NTU |
| Total Suspended Solids | <5mg/L |
| Particulates | 5μm |
| Total hardness | <10 mg/L |
| Dissolved Organics | <1mg/L |
| Suspended oil | <5mg/L |
| Free chlorine | Continuous: 0.5ppm |
| Cumulative: 24000ppm-hrs | |
| pH | 0.5-14 |
| Silica colloidal | <5mg/L |
| Surfactants | 0 mg/L |
| Ozone | 0 mg/L |
| Chlorine dioxide | 0 mg/L |
Kind notice: Delta Filtration does not offer original 3M Liqui-cel, if alternative product is acceptable, please contact Delta sales team.