Mauritania Pentair Aquaflex 64 Retrofit

Fluoro-Free DELFLEX Series Ultrafiltration module DFPES9055 model can work as economical replacement for Pentair Norit Aquaflex HP 55 with better cost effectiveness, no modification is required because of its compatible dimensions, DFPES9055 can well fit into original membrane systems. Hollow fiber UF module allows for larger loading capacity with same space, 0.02μm pore size contributes to good rejection to bacteria and virus, PES material has very good hydrophilic feature and less membrane fouling.

Category:

MauritaniaPentair Equivalent

Phone:400-888-8888

Inquire

Product Description

Fluoro-Free DELFLEX Series Ultrafiltration module DFPES9064 model can work as economical replacement for Pentair Aquaflex 64 with better cost effectiveness, no piping or fitting modification is required because of its compatible dimensions, DFPES9064 can well fit into original membrane systems with same operation parameters.
Hollow fiber UF module allows for larger loading capacity with same space, 0.02μm pore size contributes to good rejection to bacteria and virus, PES material has very good hydrophilic feature and less membrane fouling.

Features

● 0.02μm pore size produces high quality filtrate

● Direct replacement for Pentair Ultrafiltration membrane

● Inside-out flow, no air scour needed

● Excellent chemical resistance

● Typical permeate SDI<3, turbidity <0.1NTU

Application

● Municipal wastewater treatment

● Palm oil wastewater treatment

● Industrial wastewater treatment

● Pharmaceutical wastewater treatment

● Food&Beverage wastewater treatment

Model		DFPES9040	DFPES9055	DFPES9064
Specification	Membrane material	PES	PES	PES
	Housing material	UPVC	UPVC	UPVC
	Pore size(μm)	0.02	0.02	0.02
	Inner diameter(mm)	0.8	0.8	0.8
	Outer diameter(mm)	1.5	1.5	1.5
	Membrane area(m2)	40	55	64
	Installation length(mm)	1901-1905	1901-1905	1901-1905
	Module diameter(mm)	220	220	220
	Connection size (Feed/Permeate/Concentrate)	DN65(73mm)	DN65(73mm)	DN65(73mm)
	Potting material	Epoxy resin	Epoxy resin	Epoxy resin
	Flow direction	Inside-out	Inside-out	Inside-out
Operation parameter	Max chlorine concentration(ppm)	500	500	500
	pH range	2 - 13	2 - 13	2 - 13
	Working temperature(℃)	5 - 40	5 - 40	5 - 40
	Max feed pressure(Mpa)	0.3	0.3	0.3
	Max backwash pressure(Mpa)	0.2	0.2	0.2
	Max trans-membrane pressure (Mpa)	0.2	0.2	0.2
	Max backwash flow(L/㎡/h)	250~300	250~300	250~300

FAQ

Q: How is the DELFLEX PES module performance compared with Pentair X-Flow?

A: It is equivalent, Fluoro-Pure DELFLEX is made with our own mould to make sure it can replace Pentair module, super hyhydrophilic feature can provide high flux.

Q: Where is your factory located? Can I visit your factory?

A: Our factory is located in Nantong, just two hours driving from Shanghai airport, you are welcome to visit us to discuss cooperation face to face.

Q: Do I need to run backwash for the inside-out PES membrane?

A: Backwash is still needed to flush out contaminants and recover membrane flux, air scour is not necessary.

Q: What membrane should I choose for drinking water filtration, PES or PVDF?

A: PES is naturally hydrophilic and suitable for drinking water filtration, fine pore size could effectively retain contaminants such as bacteria and virus.

Q: Besides Pentair Nortit UF replacement, do you have other UF series?

A: Yes, we are making Ultrafiltration replacement for below brands:

Dow UF SFP-2660, SFP-2860, SFP-2880, SFP-2860XP, SFP-2880XP

DuPont IntegraPac IP-55 and IP-77

Hydranautics HYDRAcap MAX 40/60/80

3M Liqui-Flux Membrane Module

Toray TORAYFIL HFU-2020N

SUEZ ZeeWeed Module

Hyflux Kristal Membrane

PALL ARIA Module

Mauritanianone

MauritaniaRetrofit For XIGA XF40