Nauru Poly Classic E Melt Blown Cartridge Filter

Category:

NauruDepth Filter

Phone:400-888-8888

Inquire

Product Description

Poly Classic E melt blown cartridge filter is pure polypropylene of special structure with great dirty holding capacity depth filter, which is an exceptional value for general applications where long life, high flow rate purity and low change-out frequency are required. Special embossed structures are formed on the cartridge surface so that the filter inside and outside is compact and has stable filtration efficiency, and the suspended solid can be effectively intercepted, with the interception rate up to 99%.The raw materials used in the filter have passed NSF certification.

Features

　　● Graded pore structure enhances dirt holding capacity

　　● High contaminant removal efficiency

　　● Wide application

　　● Great Flow rate and low pressure drop

　　● Long service life

Application

　　● Pre-RO

　　● Electronic

　　● Oil injection water

　　● Chemical solvents

　　● Drinking water treatment

　　● Cooling water

Specification

Materials of Construction
Filter Media	Polypropylene
End Cap Material	NA or Polypropylene
Core	NA or Polypropylene
End Cap	222 Flat/222 Fin/226 Flat/226 Fin/DOE
O-Rings	Silicone/EPDM/Viton/NBR
Dimensions(Nominal)
Nominal Outside Diameter :	2.5inch/63±1mm
Nominal Inside Diameter	1.1inch/28mm
Length	10inch,20inch,30inch,40inch, 50inch,60inch,70inch
Micron Ratings	1μm,3μm,5μm,10μm,20μm, 30μm,50μm,75μm,100μm
Operating Condition
Maximum Temperature:	180℉ (82 ℃)
Maximum Pressure:	50psi (3.5bar) @ 68 ℉ (20 ℃)
Recommended change-out pressure:	35psi (2.4bar) @ 68 ℉ (20 ℃)