Nauru Liqui-cel G885H G885RH Retrofit

Category:

NauruDegassing Membrane Contactor

Phone:400-888-8888

Inquire

Product Description

Delta Filtration degassing membrane contactor DFMC10x28 model has 128㎡ large filtration area which produces flow rate range 10~57m³/hr, with stainless steel 316 vessel, it provides higher working temperature up to 70℃, it is alternative for 3M Liqui-Cel G885H G885RH EXF-10x28 without modification. Microporous hollow fiber with naturally hydrophobic feature can effectively retain oxygen(O₂) and carbon dioxide(CO₂), thus producing high quality feed water for EDI units.

Typical features:

　　● PP membrane with super hydrophobic nature

　　● Compact design with easy installation

　　● High working pressure and temperature

　　● Direct replacement for 3M Liqui-Cel

Specification

Model	DFMC10x28
Dimensions(mm)	285x1187
Flow range	10 - 57m³/hr
Membrane material	Polypropylene(PP)
Membrane housing	Stainless steel
Potting material	Epoxy resin
Membrane area	128 ㎡
Seal material	EPDM / Viton
Connection(liquid)	3 inch Flange
Connection(vacuum)	1 inch Flange
Working pressure(Shellside)	5-50℃@0.72MPa 70℃@0.21MPa
Working pressure(Lumenside)	25℃@0.62MPa

Feed Water Quality Recommendation

Indicator	Suggested value
Colloids(SDI)	<3
Turbidity	<0.5NTU
Total Suspended Solids	<5mg/L
Particulates	5μm
Total hardness	<10 mg/L
Dissolved Organics	<1mg/L
Suspended oil	<5mg/L
Free chlorine	Continuous: 0.5ppm
Free chlorine	Cumulative: 24000ppm-hrs
pH	0.5-14
Silica colloidal	<5mg/L
Surfactants	0 mg/L
Ozone	0 mg/L
Chlorine dioxide	0 mg/L