PRODUCTS CENTER
Nauru 3M Liqui-Cel G669H G669RH Retrofit
Category:
Product Description
Delta Filtration degassing membrane contactor DFMC10x28 model has 128㎡ large filtration area which produces flow rate range 10~57m³/hr, stainless steel housing allows for higher working temperature, it is alternative for 3M Liqui-Cel G669H G669RH EXF-10x28 X50 specially for CO2 removal, thus producing high quality feed water for EDI units.
Typical features:
● PP membrane with super hydrophobic nature
● Compact design with easy installation
● High working pressure and temperature
● Direct replacement for 3M Liqui-Cel
Specification
| Model | DFMC10x28 |
| Dimensions(mm) | 285x1187 |
| Flow range | 10 - 57m³/hr |
| Membrane material | Polypropylene(PP) |
| Membrane housing | SS 316 |
| Potting material | Epoxy resin |
| Membrane area | 128 ㎡ |
| Seal material | EPDM / Viton |
| Connection(liquid) | 3 inch Sanitary |
| Connection(vacuum) | 1.5 inch Sanitary |
| Working pressure(Shellside) |
5-50℃@0.72MPa 70℃@0.21Mpa |
| Working pressure(Lumenside) | 25℃@0.3MPa |
Feed Water Quality Recommendation
| Indicator | Suggested value |
| Colloids(SDI) | <3 |
| Turbidity | <0.5NTU |
| Total Suspended Solids | <5mg/L |
| Particulates | 5μm |
| Total hardness | <10 mg/L |
| Dissolved Organics | <1mg/L |
| Suspended oil | <5mg/L |
| Free chlorine | Continuous: 0.5ppm |
| Cumulative: 24000ppm-hrs | |
| pH | 0.5-14 |
| Silica colloidal | <5mg/L |
| Surfactants | 0 mg/L |
| Ozone | 0 mg/L |
| Chlorine dioxide | 0 mg/L |
Kind notice: Delta Filtration does not offer original 3M Liqui-cel modules, if alternative product is acceptable, please contact Delta sales team.
Delta Filtration Material Co.Ltd.
Sales office: 2811, Block B, Zhongnan CBD, Nantong, Jiangsu, China
Tel: 86-(0)51389157856
WhatsApp: +86-13477006021
Email: sales@delta-filtration.com
www.dt-filtri.com
www.delta-filtration.com
Customer message