PRODUCTS CENTER
Papua New Guinea Sterile PES Filter Cartridge
Category:
Product Description
Poly Pleat SR-PES sterile PES filter cartridge is constructed with 100% FDA compliant PES membrane and PP hardware, hydrophilic PES membrane provides high flow rate and low pressure drop. Poly Pleat SR-PES series is sterile grade, 0.2 micron PES filter can be used as final filter in Food&Beverage and Biopharmaceutical applications.
Poly Pleat SR-PES series meet U.S. FDA requirements for food contact under the applicable regulations in 21 CFR and the test criteria for USP Class VI-121C Plastics.
Features
● Sterile filtration
● Easy wetting PES membrane
● Wide chemical compatibility
● 100% Integrity tested
● Thermal welding production
● Different adaptor is available
● Junior cartridge filter is available
Application
● Pharmaceutical
● Final filter prior to bottling
● Chemical solvents
● Ultra Pure Water
● Food and beverage
|
Brand |
Series |
|
Pall |
Supor EKV, EX, ECV |
|
3M Cuno |
BevASSURE |
|
Parker |
PROPOR PES |
|
Eaton |
BECO MEMBRAN PS |
|
Suez |
XPleat PES |
|
Amazon Filters |
SupaPore VPG, VPB and VPBA |
|
Graver Technologies |
ZTEC P, E Series |
|
Materials of Construction |
|
|
Filter Media |
Polyethersulfone(PES) |
|
End Caps |
Polypropylene |
|
Core |
Polypropylene |
|
End Cap |
222 Flat/222 Fin/226 Flat/226 Fin/DOE |
|
O-Rings |
Silicone/EPDM/Viton/NBR |
|
Dimensions(Nominal) |
|
|
Nominal Outside Diameter : |
2.68inch/68±1(mm) |
|
Nominal Inside Diameter |
1.26inch/32（mm） |
|
Micron Ratings |
0.1μm,0.2μm,0.45μm,0.65μm, 1.0μm |
|
Filtration Area |
0.6m²(10’’) |
|
Operating Condition |
|
|
Maximum Temperature: |
180℉ (82 ℃) |
|
Maximum Pressure: |
73psi (5bar) @ 68 ℉ (20 ℃) |
|
Recommended change-out pressure: |
35psi (2.4bar) @ 68 ℉ (20 ℃) |
|
Sterilization |
|
|
Hot Water: |
85 ℃ 60min. 100 cycles |
|
Steam In Place: |
121 ℃ 30min. 100 cycles |
|
Autoclave: |
121 ℃ 30min. 100 cycles |
Order Information
|
For Example: DFSR-PES 02 - 40 F S |
|||||||
|
DF |
Series |
Rating |
- |
Length |
End Cap |
O-Ring |
Inner Core |
|
Delta Filtration |
SR-PES |
01=0.1μm 02=0.2μm 045=0.45μm 065=0.65μm 1=1μm
|
NA |
10=10inch 20=20inch 30=30inch 40=40inch 50=50inch 60=60inch 70=70inch |
A=222/Flat B=222/Fin C=226/Flat D=226/Fin D2=226/Fin with SS316 insert F=DOE |
S=Silicone E=EPDM V=Viton N=NBR |
Blank=Polypropylene S=SS304 L=SS316
|
Why work with Delta Filtration?
● Prompt understanding of your requirement by experienced team
● Reliable product quality be strict quality control process
● Quick delivery to customer
● OEM Service at competitive cost
● One-stop purchase for filtration products
Delta Filtration Material Co.Ltd.
Sales office: 2811, Block B, Zhongnan CBD, Nantong, Jiangsu, China
Tel: 86-(0)51389157856
WhatsApp: +86-13477006021
Email: sales@delta-filtration.com
www.dt-filtri.com
www.delta-filtration.com
Customer message