Papua New Guinea Pleat Plus M High Flow Cartridge Filter

Pleat Plus M high flow filter is retrofit for 3M Cuno 740B filter cartridge, the depth filter is manufactured in radial pleating technology which can maximize its surface filtration area, 6.5 inch (165 mm) outer diameter provides much higher flow rate and dirt holding capacity than those conventional pleating filters. By using FDA compliant filter media, Pleat Plus M filter offers high contaminants removal efficiency and broad chemical compatibility, making it suitable for a variety of filtration process. With “twist-to-lock” design, the filter can be installed and changed easily. It can replace 3M high flow filter cartridge 100% while providing a much more economical filtration solution.

Category:

Papua New GuineaHigh Flow Filter

Phone:400-888-8888

Inquire

Product Description

Pleat Plus M high flow filter is retrofit for 3M Cuno 740B filter cartridge, the depth filter is manufactured in radial pleating technology which can maximize its surface filtration area, 6.5 inch (165 mm) outer diameter provides much higher flow rate and dirt holding capacity than those conventional pleating filters. By using FDA compliant filter media, Pleat Plus M filter offers high contaminants removal efficiency and broad chemical compatibility, making it suitable for a variety of filtration process. With “twist-to-lock” design, the filter can be installed and changed easily. It can replace 3M high flow filter cartridge 100% while providing a much more economical filtration solution.

As a professional high flow filter cartridge manufacturer, Delta Filtration implements strict quality control process which guarantees every filter shipped out is qualified and efficient.

Features	Benefits	Advantages
Radial pleating technology	Up to 70% increase in surface area	Higher processing capability with greater flow
Increased surface area of cartridge	Lower pressure drop	Fewer change-out, less maintenance costs
Single/Double O-rings Seal	Positive seal with no bypass	High product quality
6.5inch large diameter	Fewer filter usage	Less footprint

Industries and Applications

Food&Beverage：Bottled water, Beers, Wines, Soft drinks

Fine chemicals:Polymers, Acids, Bases, Solvents

Water Treatment: Pre reverse osmosis, Resin trap

Oil & Gas: Water injection, Amine filtration, Glycols

Power Generation: boiler feed water, return condensate water

Materials of Construction
Filter Media	Polypropylene/Glass Fiber
End Caps	Polypropylene
Inside Core	Polypropylene
Outside Core	Netting
O-Rings	Silicone/EPDM/NBR
Dimensions(Nominal)
Nominal Outside Diameter :	6.5inch/165mm
Nominal Inside Diameter	3.15inch/80mm 1.57inch/40mm
Length	40inch(1016mm)/60inch(1525mm)
Micron Ratings	1μm,3μm,5μm,10μm,20μm, 30μm,50μm,75μm,100μm

Operating Condition
Maximum Temperature:	Polypropylene 180℉ (82 ℃) Glass Fiber 248℉ (121 ℃)
Maximum Pressure:	49psi (3.4bar) @ 68 ℉ (20 ℃)
Recommended change-out pressure:	35psi (2.4bar) @ 68 ℉ (20 ℃)