Papua New Guinea Pleat Plus N High Flow Cartridge Filter

Pleat Plus N high flow cartridge filter is designed to replace 3M high flow filter and fits well in 3M existing filter housing, 6.5 inch (165 mm) outer diameter offers high flow rate thus fewer filters are needed. Polypropylene and glass fiber pleated media are available, it provides stable and consistent particle removal performance which ensures downstream filtration system under good protection. Compared with 2.5 inch conventional filters, it offers lower pressure drop, easy change-out feature makes it suitable for high flow filtration needs with limited space.

Category:

Papua New GuineaHigh Flow Filter

Phone:400-888-8888

Inquire

Product Description

Pleat Plus N high flow cartridge filter is designed to replace 3M high flow filter and fits well in 3M existing filter housing, 6.5 inch (165 mm) outer diameter offers high flow rate thus fewer filters are needed. Polypropylene and glass fiber pleated media are available, it provides stable and consistent particle removal performance which ensures downstream filtration system under good protection. Compared with 2.5 inch conventional filters, it offers lower pressure drop, easy change-out feature makes it suitable for high flow filtration needs with limited space.

Features

　　● Outside to inside structure enhances the flow rate

　　● Widely excellent chemical compatibility

　　● Multi membrane layer enhances the dirt holding capacity

　　● Excellent handle design improve the replacement convenience

　　● 100% thermally welded reduces the leakage risk

　　● Long service life

Application

　　● Pre-RO

　　● Industrial condensate water

　　● Microeletronics process water

　　● Chemical solvents

　　● Drinking water treatment

　　● Cooling water

　　● Food & Beverage

Specification

Materials of Construction
Filter Media	Polypropylene/Glass Fiber
End Caps	Polypropylene
Inside Core	Polypropylene
Outside Core	Polypropylene
O-Rings	Silicone/EPDM/NBR
Dimensions(Nominal)
Nominal Outside Diameter :	6.5inch/165mm
Nominal Inside Diameter	1.57inch/40mm 3.15inch/80mm
Length	40inch(1016mm)/60inch(1525mm)
Micron Ratings	1μm,3μm,5μm,10μm,20μm, 30μm,50μm,75μm,100μm
Operating Condition
Maximum Temperature:	Polypropylene 180℉ (82 ℃) Glass Fiber 248℉ (121 ℃)
Maximum Pressure:	49psi (3.4bar) @ 68 ℉ (20 ℃)
Recommended change-out pressure:	35psi (2.4bar) @ 68 ℉ (20 ℃)