Papua New Guinea Dizzer P 4040 Retrofit

DelGuard Series Ultrafiltration module is made with hollow fiber Polyethersulfone(PES) membrane with good hydrophility and high flux performance, it can fit into standard RO membrane housing with compatible dimensions. As economical alternative for Inge dizzer P 4040 Ultrafiltration unit, DFDGPES4040 can help customers reduce operation and maintenance cost.

Product Description

DelGuard Series Ultrafiltration module is made with hollow fiber Polyethersulfone(PES) membrane with good hydrophility and high flux performance, it can fit into standard RO membrane housing with compatible dimensions. As economical alternative for Inge dizzer P 4040 Ultrafiltration unit, DFDGPES4040 can help customers reduce operation and maintenance cost.

 

Hollow fiber UF module allows for larger loading capacity with same space, 0.02μm pore size can effectively remove fine particles, bacteria and virus, with horizontal installation, DFDGPES4040 offers a good solution to save foorprint.
 

Features

    ● 0.02μm pore size produces high quality permeate

    ● Direct replacement for Inge dizzel L VK-0049 VK-0051

    ● Inside-out flow, no air scour needed

    ● Typical permeate SDI<3, turbidity <0.1NTU

 

Specification

Model DFDGPES4040
Specification Membrane material PES
Housing material ABS
Pore size(μm) 0.02
Inner diameter(mm) 0.7
Outer diameter(mm) 1.3
Module size 4'' x 40''
Membrane area(m2) 4
Potting material Epoxy resin(EP)
Flow direction Inside-out
Operation parameter Max chlorine concentration(ppm) 500
pH range 2 - 13
Working temperature(℃) 0 - 40
Max feed pressure(Mpa) 0.3
Max trans-membrane pressure (Mpa) 0.3
Flow rate(GPD) 1300 - 4000