Papua New Guinea Retrofit For TapTec P 4040-6.0

DelGuard Series Ultrafiltration module is made with hollow fiber Polyethersulfone(PES) membrane with good hydrophility and high flux performance, it can fit into standard RO membrane housing with compatible dimensions. As economical alternative for Inge dizzer P 4040 Ultrafiltration unit, DFDGPES4040 can help customers reduce operation and maintenance cost.

Category:

Papua New GuineaDuPont Inge Equivalent

Phone:400-888-8888

Inquire

Product Description

DelGuard Series Ultrafiltration module DFDGPES4040 is made with hollow fiber Polyethersulfone(PES) membrane for commercial and residential filtraton process, it can fit into standard RO membrane housing with compatible dimensions. As economical alternative for Dupont TapTec P 4040-6.0 and TapTec P 4040-4.0 Ultrafiltration module, DFDGPES4040 can help customers reduce operation and maintenance cost.

Features

● 0.02μm pore size produces high quality permeate

● Direct replacement for Dupont TapTec P 4040-6.0

● Inside-out flow, no air scour needed

● Typical permeate SDI<3, turbidity <0.1NTU

Specification

Model		DFDGPES4040
Specification	Membrane material	PES
	Housing material	ABS
	Pore size(μm)	0.02
	Inner diameter(mm)	0.7
	Outer diameter(mm)	1.3
	Module size	4'' x 40''
	Membrane area(m2)	4
	Potting material	Epoxy resin(EP)
	Flow direction	Inside-out
Operation parameter	Max chlorine concentration(ppm)	500
	pH range	2 - 13
	Working temperature(℃)	0 - 40
	Max feed pressure(Mpa)	0.3
	Max trans-membrane pressure (Mpa)	0.3
	Flow rate(GPD)	1300 - 4000