Papua New Guinea Tubular Ultrafiltration Membrane

Tubular ultrafiltration membrane module is developed for fluids with high solid content or high suspended solids, typical membrane pore size is 30nm~50nm, membrane inner tube diameter can be 5mm 8mm 12mm, they are much larger than hollow fiber UF, robust membrane structure contributes to less fiber breakage. It also features as strong anti-pollution ability and super high flux rate based on cross-flow filtration, due to wide flow paths, tubular UF membrane is less likely to be clogged.

Product Description

Tubular ultrafiltration membrane module is developed for fluids with high solid content or high suspended solids, typical membrane pore size is 30nm~50nm, membrane inner tube diameter can be 5mm 8mm 12mm, they are much larger than hollow fiber UF, robust membrane structure contributes to less fiber breakage. It also features as strong anti-pollution ability and super high flux rate based on cross-flow filtration, due to wide flow paths, tubular UF membrane is less likely to be clogged.

 

DelTube UF is made with FDA CFR 21 and EU regulation 1935/2004 compliant materials which allows for wide applications in landfill leachate, chemical wastewater, pharmaceutical and biotech process.

Features

    Super high flux range

    ● Direct replacement for most tubular membrane brands

    ● 100% integrity tested

    ● Cross flow mode

Application

    ● Dairy products processing

    ● Landfill leachate

    ● Fermentation clarification

Retrofit for brands Pentair/Berghof/Porex
Specification Membrane material PVDF
Housing material PVC
Pore size 30 / 50 nm
Tube diameter(mm) 5 / 8 / 12
Module diameter(inch) 8.3
Length (mm) 3,000
Diameter (mm) 220
Membrane area 27 
Operation parameter Maximum operating pressure 8 bar
Minimum outlet puressure 0.7 bar
Max permeate pressure 0.2 bar
Max working temperature 60 
pH range continuous 2 - 10
pH range short term 2 - 12
Max.chlorine concentration(ppm) 250,000 ppm/h