Sri Lanka Retrofit For Pentair X-Flow XIGA 40

DelGuard Series Ultrafiltration module is made with hollow fiber 100% Polyethersulfone(PES) membrane which is naturally hydrophilic and suitable for liquid filtration, it can be used to replace Pentair X-FLOW XIGA / SEAGUARD Series UF membrane modules in diverse applications including pretreatment for seawater SWRO desalination, drinking water treatment, injection water production, boiler feed water production etc., DFPES9040XG model is installed horizontally into pressure vessel, it can significantly save space compared with vertically installed modules.

Category:

Sri LankaPentair Equivalent

Phone:400-888-8888

Inquire

Product Description

DelGuard Series Ultrafiltration module is made with hollow fiber 100% Polyethersulfone(PES) membrane which is naturally hydrophilic and suitable for liquid filtration, it can be used to replace Pentair X-FLOW XIGA / SEAGUARD Series UF membrane modules in diverse applications including pretreatment for seawater SWRO desalination, drinking water treatment, injection water production, boiler feed water production etc., DFPES9040XG model is installed horizontally into pressure vessel, it can significantly save space compared with vertically installed modules.

Hollow fiber UF module allows for larger loading capacity with same space, 0.02μm pore size contributes to good rejection to bacteria and virus, PES material has very good hydrophilic feature and less membrane fouling. Available membrane areas are 40m2(Seaguard XIGA40), 55m2(Seaguard XIGA55) and 64m2(Seaguard XIGA64).

Features

● 0.02μm pore size produces high quality filtrate

● Direct replacement for Pentair X-Flow XIGA 40 / XF40

● Inside-out flow, no air scour needed

● Excellent chemical resistance

● Typical permeate SDI<3, turbidity <0.1NTU

Model		DFPES9040XG	DFPES9055XG	DFPES9064XG
Specification	Membrane material	PES	PES	PES
	Housing material	PVC	PVC	PVC
	Pore size(μm)	0.02	0.02	0.02
	Inner diameter(mm)	0.8	0.8	0.8
	Outer diameter(mm)	1.5	1.5	1.5
	Membrane area(m2)	40	55	64
	Module length(mm)	1,527.5	1,537.5	1,537.5
	Element outer diameter(mm)	200	220	220
	Permeate collector inner diameter(mm)	42	42	42
	Potting material	Epoxy resin(EP)	Epoxy resin(EP)	Epoxy resin(EP)
	Flow direction	Inside-out	Inside-out	Inside-out
Operation parameter	Max chlorine concentration(ppm)	500	500	500
	pH range	2 - 13	2 - 13	2 - 13
	Working temperature(℃)	5 - 40	5 - 40	5 - 40
	Max feed pressure(Mpa)	0.3	0.3	0.3
	Max backwash pressure(Mpa)	0.3	0.3	0.3
	Max trans-membrane pressure (Mpa)	0.3	0.3	0.3
	Suggested backwash flow(L/H)	4,000	5,500	6,400