PRODUCTS CENTER


Tajikistan DELWED ZW1500 PVDF Module

Fluoro-Pure DELWED Series Ultrafiltration module is made with hollow fiber PVDF membrane material, as an integrated membrane technology provider, we have strict quality control procedure and internal test to make sure DELWED series provides excellent filtration performance without leakage. With 0.02μm pore size, Fluoro-Pure DELWED Series can effectively retain particles, bacteria and virus and produce clean water which makes is suitable for drinking water treatment, pre-treatment for reverse osmosis, industrial wastewater treatment etc. Fluoro-Pure DELWED Series is integrity tested and 100% passed our quality control standard.

Product Description

Fluoro-Pure DELWED Series Ultrafiltration module is made with hollow fiber PVDF membrane material, as an integrated membrane technology provider, we have strict quality control procedure and internal test to make sure DELWED series provides excellent filtration performance without leakage. With 0.02μm pore size, Fluoro-Pure DELWED Series can effectively retain particles, bacteria and virus and produce clean water which makes is suitable for drinking water treatment, pre-treatment for reverse osmosis, industrial wastewater treatment etc. Fluoro-Pure DELWED Series is integrity tested and 100% passed our quality control standard.

Features

   PVDF membrane with high mechanical strength

  ● Operation same as original brand when for replacement 

  ● 0.02μm can effective retain bacteria, virus

    ● Outside-in flow allows for wide range of feed water quality

Comparison between Ultrafiltration and conventional technology

 

Conventional system

Ultrafiltration

Footprint

Large

At least 50% smaller

Permeate water quality

Good

Excellent

Chemical consumption

High

Low

Operation cost

High

Low

Life span

Short

Long

 

Typical Applications:

 

Winemaking wastewater treatment Metal processing wastewater treatment

Power plant water treatment

Pulp and paper water treatment

Model

DFPVDF1500

 

 

 

 

 

Specification

Membrane material

PVDF

Housing material

UPVC

Pore size(μm)

0.02

Inner diameter(mm)

0.7

Outer diameter(mm)

1.3

Membrane area(m2)

55

Overall length(mm)

1,920

Module diameter(mm)

180

Feed/Filtrate port

DN50

Rejection port

DN40

Potting material

Epoxy resin

 

 

 

Operation

parameter

Max.chlorine concentration(ppm)

2000

pH range

2 - 12

Max backwash pressure(Mpa)

0.2

Max feed pressure(Mpa)

0.3

Max backwash flow(L/H)

5500

Air scour rate(Nm3/h)

5.0 - 7.0

Design flux(LMH)

50 - 120