vatican PVDF cartridge filter

Poly Pleat PVDF Cartridge filter is designed for critical filtration of aqueous and organic solvent-based solutions such as protein, buffer, large volume parenteral (LVP) and small volume parenteral (SVP) etc., it is available with both cartridge and capsule type. The proprietary membrane casting technology provides a thick membrane with high contaminant holding capacity, excellent retention characteristics, low extractable and low protein binding, easy wetting PVDF membrane provides high flow rate and low pressure drop.

Category:

vaticanMembrane Filter

Phone:400-888-8888

Inquire

Product Description

Poly Pleat PVDF Cartridge filter is designed for critical filtration of aqueous and organic solvent-based solutions such as protein, buffer, large volume parenteral (LVP) and small volume parenteral (SVP) etc., it is available with both cartridge and capsule type. The proprietary membrane casting technology provides a thick membrane with high contaminant holding capacity, excellent retention characteristics, low extractable and low protein binding, easy wetting PVDF membrane provides high flow rate and low pressure drop.

Poly Pleat PVDF Filter is equivalent to Millipore Vitipore II series(e.g:CVBW73PK1, CVPB73PK1) with every filter integrity tested.

Features

　　● Low protein binding and extractable

　　● Easy wetting PVDF membrane

　　● 100% Integrity tested

　　● Steam sterilization allowed

　　● Compatible with a wide range of solvents, acids and chemicals

Application

　　● Antibiotics

　　● Ophthalmic Solutions

　　● Chemical solvents

　　● Food and beverage

　　● WFI filtration

Quality Assurance

　　● Bacterial retention of 107 CFU/cm2 by B. Diminuta (ATCC 19146)

　　● Manufactured in factory according to ISO 9001:2015

　　● 100% Integrity tested before shipment

　　● Easy traceability with unique serial number on each filter

Materials of Construction
Filter Media	Hydrophilic PVDF
End Caps	Polypropylene
Core	Polypropylene
End Cap	222 Flat/222 Fin/226 Flat/226 Fin/DOE
O-Rings	Silicone/EPDM/Viton/NBR
Dimensions(Nominal)
Nominal Outside Diameter :	2.68inch/68±1(mm)
Nominal Inside Diameter	1.26inch/32（mm）
Micron Ratings	0.1μm,0.2μm,0.45μm,0.65μm, 1.0μm
Filtration Area	0.6m²(10’’)

Operating Condition
Maximum Temperature:	180℉ (82 ℃)
Maximum Pressure:	73psi (5bar) @ 68 ℉ (20 ℃)
Recommended change-out pressure:	35psi (2.4bar) @ 68 ℉ (20 ℃)