PRODUCTS CENTER
vatican PTFE Membrane
Category:
Product Description
FlatMem Hydrohopbic PTFE membrane filter is naturally hydrophobic which makes it suitable to be venting membrane, uniform pore size distribution contributes to high rejection rate to particles and bacteria as well as providing high flow rate. Teflon membrane filter has broad chemical compatibility offering good resistance to high-temperature, acid and base, it is available with steam and autoclave sterilization. Advanced casting and lamination technology reduced fiber shedding and extractables. Polytetrafluoroethylene membrane sheet and roll are available.
Features
● USP Class VI Compliant
● High flow rate and throughput
● Good mechanical strength
● Low protein binding
● Lot-to-lot consistency
Application
● Venting membrane
● Gas filtration
● Medical device
● Electronic components
● Aggressive chemicals
| Membrane | Pore size | Bubble point(Mpa) | Flow rate (ml/min/cm2@-10psi) | Thickness |
| Hydrophobic PTFE | 0.1μm | 0.17-0.18 | 12~20 | 160-190μm |
| 0.22μm | 0.12-0.16 | 22~30 | ||
| 0.45μm | 0.08-0.09 | 44~50 | ||
| 1.0μm | 0.04 | 80~110 | ||
| 3.0μm | 0.03 | 100~130 |
Test fluid: Alcohol at 25℃
Order Information
|
For Example: DFPTFEB022 |
|||
|
DF |
Material |
Pore Size |
Width |
|
Delta Filtration |
PTFE Hydrophobic |
010=0.1μm 022=0.2μm 045=0.45μm 065=0.65μm 1.0=1.0μm 3.0=3.0μm 5.0=5.0μm
|
Blank=260mm 508=508mm |
Delta Filtration Material Co.Ltd.
Sales office: 2811, Block B, Zhongnan CBD, Nantong, Jiangsu, China
Tel: 86-(0)51389157856
WhatsApp: +86-13477006021
Email: sales@delta-filtration.com
www.dt-filtri.com
www.delta-filtration.com
Customer message