vatican Pleat Plus P High Flow Cartridge Filter

Pleat Plus P high flow filter cartridge is retrofit for Pall Ultipleat high flow filter(e.g:HFU640UY045J), it is constructed with 6 inch (152 mm) large diameter which offers super high flow rate, it can greatly save water treatment plant footprint and reduce filter change-out cost. Inside-out flow operation keeps all the contaminants inside the filter thus making replacement process more convenient. Available filter media includes polypropylene and microfiber glass with pore size from 0.5μm to 100μm. Pleat Plus P series provide a more cost-effective solution.

Category:

vaticanHigh Flow Filter

Phone:400-888-8888

Inquire

Product Description

Pleat Plus P high flow filter cartridge is retrofit for Pall Ultipleat high flow filter(e.g:HFU640UY045J), it is constructed with 6 inch (152 mm) large diameter which offers super high flow rate, it can greatly save water treatment plant footprint and reduce filter change-out cost. Inside-out flow operation keeps all the contaminants inside the filter thus making replacement process more convenient. Available filter media includes polypropylene and microfiber glass with pore size from 0.5μm to 100μm. Pleat Plus P series provide a more cost-effective solution.

As a professional high flow filter cartridge manufacturer, Delta Filtration implements strict quality control process which guarantees every filter shipped out is qualified and efficient.

Features

1.Coreless design to make sure contaminants are detained inside filter element, making sure better cleanness inside filter housing

2.Sophisticated pleating technology can maximize filtration area and flow rate

3.Reinforced outer cage provides higher resistance to working pressure

4.Retrofit for below vendors:

Brand	Series
Pall	Ultipleat high flow
3M Cuno	High Flow HFR Series
Parker	Fulflo® ParMax™ SELECT
Eaton	LOFPLEAT™ HF Series
Amazon Filters	SupaPleat HFC
Graver Technologies	HIGH FLOW FILTER SERIES

Materials of Construction
Filter Media	Polypropylene/Glass Fiber
End Caps	Polypropylene
Inside Core	NA or Polypropylene
Outside Core	Polypropylene or Binding
O-Rings	Silicone/EPDM/NBR
Dimensions(Nominal)
Nominal Outside Diameter :	6inch/152mm
Nominal Inside Diameter	3inch/76mm
Length	20 / 40 / 60 / 80 inches
Micron Ratings	1μm,3μm,5μm,10μm,20μm, 30μm,50μm,75μm,100μm

Operating Condition
Maximum Temperature:	180℉ (82 ℃)
Maximum Pressure:	58psi (4bar) @ 68 ℉ (20 ℃)
Recommended change-out pressure:	35psi (2.4bar) @ 68 ℉ (20 ℃)