PRODUCTS CENTER


vatican Retrofit For Pentair Aqualine ALN05-60B

Pentair Aqualine ALN05-60B high flow filter is widely used in water treatment process with super large filtration capacity, this filter has 6.75 inch (171.5 mm) diameter, compared with conventional cartridges melt blown, spun bonded and string wound filters, ALN05-60B can handle large flow capacity with same filtration efficiency, thus helping customers save capital cost and operation cost. Delta Filtration Pleat Plus R Series DFHFR5-60N can replace Pentair ALN05-60B seamlessly with similar performance, OEM private label service is available.

Product Description

Pentair Aqualine ALN05-60B high flow filter is widely used in water treatment process with super large filtration capacity, this filter has 6.75 inch (171.5 mm) diameter, compared with conventional cartridges melt blown, spun bonded and string wound filters, ALN05-60B can handle large flow capacity with same filtration efficiency, thus helping customers save capital cost and operation cost.

Delta Filtration Pleat Plus R Series DFHFR5-60N can replace Pentair ALN05-60B seamlessly with similar performance, OEM private label service is available.

Features

  ● Super high flow rate

  ● Less filter change-out

  ● Absolute retention efficiency

  ● Large dirt holding capacity

  ● High surface area

  ● Long service life

Application

  ● Desalination pretreatment

  ● Ultra pure water

  ● Chemical solvents

  ● Drinking water treatment

  ● Power generation

  ● Food & Beverage

  ● Oil&Gas

Specification

Materials of Construction

Filter Media

Polypropylene

End Caps

Polypropylene

Inside Core

 Polypropylene

Outside Core

 Netting

O-Rings

Silicone/EPDM/NBR

Dimensions(Nominal)

Nominal Outside Diameter :

6.73inch/171(mm)

Nominal Inside Diameter :

2.99inch/76mm

Length

40inch(1016mm)/60inch(1560mm)

Micron Ratings

1μm,3μm,5μm,10μm,20μm,
30μm,50μm,75μm,100μm

Operating Condition

Maximum Temperature:

Polypropylene 180 ℉ (82 ℃)

Maximum Pressure:

49psi (3.4bar) @ 68 ℉ (20 ℃)

Recommended change-out pressure:

35psi (2.4bar) @ 68 ℉ (20 ℃)

Order Information

Pleat Plus R High Flow Cartridge Filter