High Flow Filter Cartridge - Pall Ultipleat Retrofit

Pleat Plus P high flow filter cartridge is equivalent to Pall Ultipleat high flow water filter with 6 inch large diameter which provides large filtration area and high flow rate up to 110m³/hr per element, absolute rating from 1micron to 100micron can offer excellent protection for downstream membrane system, available length are 20inch, 40inch, 60inch and 80inch.

PleatPlus P series cartridge can greatly save footprint and reduce filter change-out cost, it has been used in wide range of filtration process including Oil&Gas, Power Plant, Desalination, Food&Beverage Industries etc., Delta Filtration provides OEM private label and fast shipping service.

Features

► Compatible dimensions allows for direct fit into original filter housing.

► Sophisticated pleating technology can maximize filtration area and service life.

► Reinforced outer cage and inner core option provides robust structure.

► Proven performance by successful references from different industries.

Economical replacement for below vendors:

Brand	Series
Pall	Ultipleat high flow
3M Cuno	High Flow HFR Series
Parker	Fulflo® ParMax™ SELECT
Eaton	LOFPLEAT™ HF Series
Amazon Filters	SupaPleat HFC
Graver Technologies	HIGH FLOW FILTER SERIES

Materials of Construction
Filter Media	Polypropylene/Glass Fiber
End Caps	Polypropylene
Inside Core	NA or Polypropylene
Outside Core	Polypropylene or Binding
O-Rings	Silicone/EPDM/NBR
Dimensions(Nominal)
Nominal Outside Diameter :	6inch/152mm
Nominal Inside Diameter	3inch/76mm
Length	20 / 40 / 60 / 80 inches
Micron Ratings	1μm,3μm,5μm,10μm,20μm, 30μm,50μm,75μm,100μm

Operating Condition
Maximum Temperature:	180℉ (82 ℃)
Maximum Pressure:	58psi (4bar) @ 68 ℉ (20 ℃)
Recommended change-out pressure:	35psi (2.4bar) @ 68 ℉ (20 ℃)

Order Information

For Example: DFHFP 5 - 40 S C

DFHF

Series

Rating

Length

Material

O-Ring

Cage

Delta Filtration High Flow

P=Pleat Plus P

1=1μm

3=3μm

5=5μm

10=10μm

20=20μm

30=30μm

50=50μm

75=75μm

100=100μm

20=20inch

40=40inch

60=60inch

80=80inch

Blank=Polypropylene

G=Glass Fiber

S=Silicone

E=EPDM

N=NBR

V=Viton

C=Cage

B=Belt

FAQ List

Q: How is your PleatPlus P cartridge filter performance compared with Pall Ultipleat?

A: Delta Filtration PleatPlus P cartridge provides superior performance in terms of filtrate SDI and dirt holding capacity, dimensions are compatible which allows for direct replacement.

Q: How long is your delivery time?

A: Thanks to large production capacity, usually we can deliver within 2 weeks.

Q: Can you export to my country?

A: Yes, Delta Filtration has export license and we can export to abroad by working with our long term shipping partners.

Q: How often your filter needs to be replaced?

A: PleatPlus P cartridge usually can work around 3~6 months(depends on project design and water quality), suggested change-out pressure is 2.4bar

Q: How many pieces 60inch cartridges can be shipped in one container?

A: 520 pcs 60inch cartridge can be accommodated in 20 foot container, if with 40foot container, quantity will be about 1200 pcs.

Q: Can we visit your factory?

A: Delta Filtration welcomes customers visit, we will be glad to prepare invitation letter to help you apply for Chinese Visa.

Send Inquiry

Contact

Category:

High Flow Filter

Keywords:

Roll Membrane | High Flow Filter | PP Pleated Filter

Tel: +86-513-89157856
Email: sales@delta-filtration.com

Pleat Plus P high flow filter cartridge is equivalent to Pall Ultipleat high flow water filter with 6 inch large diameter which provides large filtration area and high flow rate up to 110m³/hr per element, absolute rating from 1micron to 100micron can offer excellent protection for downstream membrane system, available length are 20inch, 40inch, 60inch and 80inch.

Product Description

Features

► Compatible dimensions allows for direct fit into original filter housing.

► Sophisticated pleating technology can maximize filtration area and service life.

► Reinforced outer cage and inner core option provides robust structure.

► Proven performance by successful references from different industries.

Economical replacement for below vendors:

Brand	Series
Pall	Ultipleat high flow
3M Cuno	High Flow HFR Series
Parker	Fulflo® ParMax™ SELECT
Eaton	LOFPLEAT™ HF Series
Amazon Filters	SupaPleat HFC
Graver Technologies	HIGH FLOW FILTER SERIES

Materials of Construction
Filter Media	Polypropylene/Glass Fiber
End Caps	Polypropylene
Inside Core	NA or Polypropylene
Outside Core	Polypropylene or Binding
O-Rings	Silicone/EPDM/NBR
Dimensions(Nominal)
Nominal Outside Diameter :	6inch/152mm
Nominal Inside Diameter	3inch/76mm
Length	20 / 40 / 60 / 80 inches
Micron Ratings	1μm,3μm,5μm,10μm,20μm, 30μm,50μm,75μm,100μm

Operating Condition
Maximum Temperature:	180℉ (82 ℃)
Maximum Pressure:	58psi (4bar) @ 68 ℉ (20 ℃)
Recommended change-out pressure:	35psi (2.4bar) @ 68 ℉ (20 ℃)

Order Information

For Example: DFHFP 5 - 40 S C

DFHF

Series

Rating

Length

Material

O-Ring

Cage

Delta Filtration High Flow

P=Pleat Plus P

1=1μm

3=3μm

5=5μm

10=10μm

20=20μm

30=30μm

50=50μm

75=75μm

100=100μm

20=20inch

40=40inch

60=60inch

80=80inch

Blank=Polypropylene

G=Glass Fiber

S=Silicone

E=EPDM

N=NBR

V=Viton

C=Cage

B=Belt

FAQ List

Q: How is your PleatPlus P cartridge filter performance compared with Pall Ultipleat?

A: Delta Filtration PleatPlus P cartridge provides superior performance in terms of filtrate SDI and dirt holding capacity, dimensions are compatible which allows for direct replacement.

Q: How long is your delivery time?

A: Thanks to large production capacity, usually we can deliver within 2 weeks.

Q: Can you export to my country?

A: Yes, Delta Filtration has export license and we can export to abroad by working with our long term shipping partners.

Q: How often your filter needs to be replaced?

A: PleatPlus P cartridge usually can work around 3~6 months(depends on project design and water quality), suggested change-out pressure is 2.4bar

Q: How many pieces 60inch cartridges can be shipped in one container?

A: 520 pcs 60inch cartridge can be accommodated in 20 foot container, if with 40foot container, quantity will be about 1200 pcs.

Q: Can we visit your factory?

A: Delta Filtration welcomes customers visit, we will be glad to prepare invitation letter to help you apply for Chinese Visa.

Related Products

Asahi KASEI Pall Microza UNA-620AB Retrofit

Fluoro-Pure Series Ultrafiltration module is developed to replace Asahi KASEI Pall Microza hollow fiber module UNA-620A UNA-620AB with same dimensions and operation principle, available membrane areas are 50㎡ and 65㎡ -sames as Pall or Asahi Kasei Microza module, it allows for cross-flow and dead-end filtration, 0.1μm pore size contributes to good rejection to contaminants as well as offering high flow rate.

Dow SFP-2880 2880XP Alternative

Fluoro-Pure DFP Series Ultrafiltration module is developed to replace Dow Ultrafiltration Membrane SFP 2880 with same dimensions and operation principle, compared with PES, PVC and PAN materials, PVDF has much better resistance to chemicals especially sodium hypochlorite-which is main chemical used for membrane cleaning.

Pentair X-Flow Aquaflex HP 55 Retrofit

Fluoro-Free DELFLEX Series Ultrafiltration module DFPES9055 model can work as economical replacement for Pentair Norit Aquaflex HP 55 with better cost effectiveness, no modification is required because of its compatible dimensions, DFPES9055 can well fit into original membrane systems. Hollow fiber UF module allows for larger loading capacity with same space, 0.02μm pore size contributes to good rejection to bacteria and virus, PES material has very good hydrophilic feature and less membrane fouling.

Hyflux Kristal K600B Retrofit

Fluoro-Pure D600ER Series UF filter is developed to replace Hyflux UF Membrane Kristal K600ER model, providing a more economical replacement solution and making sure retrofit module is 100% compatible with existing UF system.

IP-51XP IP-77XP Alternative

Fluoro-Pure DelPac Series Ultrafiltration module can be used as replacement for Dow IntegraPac membrane IP-51XP, IPD-51XP, IP-77XP and IPD-77XP series with compatible dimensions, PVDF hollow fiber UF membrane applies outside-in flow mode, it allows for wide range of feed water, making it a robust UF module.

Retrofit For Veolia ZW500D 600N Strength

Fluoro-Klean DELWED MBR membranes are direct replacement for Veolia ZW500D 340, ZW500D 370 and ZW500D 440 membrane modules with excellent 600N tensile strength, which is same as original membrane modules and there is no fiber breakage issue, 48M 52M MBR cassette is also available with stainless steel 316 material, each cassette can be equipped with 48, 50 and 52 modules, pulsed aeration technology contributes to less energy consumption and plant cost.

Ultrafiltration DFPVDFMAX60

Delta Filtration Ultrafiltration module DFPVDFMAX60 is equivalent to Hydranautics HYDRAcap MAX 60 UF membrane, with PVDF membrane of pore size 0.03μm, DFPVDFMAX60 can provide superior retention performance and offer log 4 rejection of Giardia cysts and Cryptosporidium oocysts.

Retrofit For 3M Liqui-Flux

Fluoro-Pure DFPESW10-75 Ultrafiltration module is made with hollow fiber Polyethersulfone(PES) membrane which is naturally hydrophilic and suitable for liquid filtration, it can be used to replace 3M MEMBRANA Liqui-Flux W10 Series UF membrane modules with better cost effectiveness.

Retrofit For XIGA XF40

DelGuard Series Ultrafiltration module is made with hollow fiber 100% Polyethersulfone(PES) membrane which is naturally hydrophilic and suitable for liquid filtration, it can be used to replace Pentair NORIT X-FLOW XIGA / SEAGUARD Series UF membrane modules in diverse applications including pretreatment for seawater SWRO desalination, drinking water treatment, injection water production, boiler feed water production etc.

Retrofit For Koch Targa II 10072-35

Delta Filtration PES Ultrafiltration module DFTGAPES10072 is equivalent to Koch Targa II 10072-35 ultrafiltration cartridge with same dimensions and equivalent performance, with 81㎡ large filtration area, it can be used in large water treatment plants with limited footprint, including mining industry, oil&gas, power plants etc.

Toray HFU-1020AN Membrane Equivalent

Fluoro-Pure DELFIL Ultrafiltration is developed to replace TORAY UF Membrane TORAYFIL series as a more economical replacement solution, 100% compatible with existing UF system, PVDF membrane and PVC housing structure provides good resistance to chlorine and strong acids, which allows for better chemical cleaning to recover membrane flux.

Retrofit For Litree Gemini-U MBR Module

Fluoro-Klean DFHFMBR-GMNU MBR membranes are alternative modules to Litree Gemini-U MBR membrane module with 31㎡ filtration area, this submerged membrane module is specially for sewage treatment process.