3M Liqui-Cel EXF 4x13 Alternative
Delta Filtration degassing membrane contactor DFMC4x13 can work as economical replacement for 3M Liqui-Cel EXF 4x13 X50 X40 for oxygen or carbon dioxide removal, it can be used in boiler water treatment, power generation, pharmaceutical and semiconductor ultra pure water process.
During water treatment process, oxygen and carbon dioxide can cause corrosion on boilers, circuts and piping, so it is crucial to remove them to guarantee the safe and long term operation of water treatment system. Membrane degassing unit is a prefered solution to this problem, it provides effcient and compact technology to remove carbon dioxide and oxygen without any chemical treatment, as well as reducing operation costs and extending life time of membrane system.
Typical features:
● Gas-permeable membrane with polypropylene material
● High process efficiency with compact design
● Improved water quality with high quality permeate
● Direct replacement for 3M Liqui-Cel
Specification
| Model | DFMC4x13 |
| Dimensions(mm) | 116x511 |
| Flow range | 0.5 - 3.4m³/hr |
| Membrane material | Polypropylene(PP) |
| Membrane housing | PP / SS 316L |
| Potting material | Epoxy resin |
| Membrane area | 9㎡ |
| Seal material | EPDM / Viton |
| Connection(liquid) | 3/4 inch FNPT |
| Connection(vacuum) | 3/4 inch FNPT |
| Working pressure(Shellside) | 5-35℃@0.6MPa 50℃@0.2MPa |
| Working pressure(Lumenside) | 25℃@0.64MPa |
Category:
Degassing Membrane Contactor
Keywords:
Roll Membrane | High Flow Filter | PP Pleated Filter
Contact Us
Tel: +86-513-89157856
Email: sales@delta-filtration.com
Product Description
Delta Filtration degassing membrane contactor DFMC4x13 can work as economical replacement for 3M Liqui-Cel EXF 4x13 X50 X40 for oxygen or carbon dioxide removal, it can be used in boiler water treatment, power generation, pharmaceutical and semiconductor ultra pure water process.
During water treatment process, oxygen and carbon dioxide can cause corrosion on boilers, circuts and piping, so it is crucial to remove them to guarantee the safe and long term operation of water treatment system. Membrane degassing unit is a prefered solution to this problem, it provides effcient and compact technology to remove carbon dioxide and oxygen without any chemical treatment, as well as reducing operation costs and extending life time of membrane system.
Typical features:
● Gas-permeable membrane with polypropylene material
● High process efficiency with compact design
● Improved water quality with high quality permeate
● Direct replacement for 3M Liqui-Cel
Specification
| Model | DFMC4x13 |
| Dimensions(mm) | 116x511 |
| Flow range | 0.5 - 3.4m³/hr |
| Membrane material | Polypropylene(PP) |
| Membrane housing | PP / SS 316L |
| Potting material | Epoxy resin |
| Membrane area | 9㎡ |
| Seal material | EPDM / Viton |
| Connection(liquid) | 3/4 inch FNPT |
| Connection(vacuum) | 3/4 inch FNPT |
| Working pressure(Shellside) | 5-35℃@0.6MPa 50℃@0.2MPa |
| Working pressure(Lumenside) | 25℃@0.64MPa |
Related Products
Send Inquiry