Retrofit For 3M Liqui-Flux W20-08 PES Ultrafiltration
Fluoro-Free DFPESW20-91 Ultrafiltration module is made with hollow fiber Polyethersulfone(PES) membrane which is naturally hydrophilic and suitable for liquid filtration, it can be used to replace 3M MEMBRANA Liqui-Flux W20-08 Series UF membrane modules with better cost effectiveness.
Hollow fiber UF module allows for larger loading capacity with same space, 0.02μm pore size contributes to good rejection to bacteria and virus, PES material has very good hydrophilic feature and less membrane fouling.
Features
● 0.02μm pore size produces high quality filtrate
● Direct replacement for 3M Liqui-Flux W20 Ultrafiltration
● Good flux recovery after cleaning
● Excellent chemical resistance by PES membrane
● Inside-Out flow mode
Application
●Pre-RO
●Power plant water treatment
●Drinking water filtration
●Oil&Gas water treatment
●Pharmaceutical water treatment
Specification
| Model | DFPESW20-91 | |
| Specification | Membrane material | PES |
| Housing material | UPVC | |
| Pore size(μm) | 0.02 | |
| Membrane area(m2) | 91 | |
| Potting material | Polyurethane resin | |
| Operation parameter | Max.chlorine concentration(ppm) | 200 |
| pH range during operation | 2 - 11 | |
| pH range during cleaning | 1 - 13 | |
| Max backwash pressure(Mpa) | 0.25 | |
| Operation pressure(Mpa) | 0.1~0.3 | |
| Operation mode | cross flow / dead end | |
| Max working temperature | 40℃ | |
| Design flux(LMH) | 50 - 150 | |
Category:
3M Equivalent
Keywords:
Roll Membrane | High Flow Filter | PP Pleated Filter
Contact Us
Tel: +86-513-89157856
Email: sales@delta-filtration.com
Product Description
Fluoro-Free DFPESW20-91 Ultrafiltration module is made with hollow fiber Polyethersulfone(PES) membrane which is naturally hydrophilic and suitable for liquid filtration, it can be used to replace 3M MEMBRANA Liqui-Flux W20-08 Series UF membrane modules with better cost effectiveness.
Hollow fiber UF module allows for larger loading capacity with same space, 0.02μm pore size contributes to good rejection to bacteria and virus, PES material has very good hydrophilic feature and less membrane fouling.
Features
● 0.02μm pore size produces high quality filtrate
● Direct replacement for 3M Liqui-Flux W20 Ultrafiltration
● Good flux recovery after cleaning
● Excellent chemical resistance by PES membrane
● Inside-Out flow mode
Application
●Pre-RO
●Power plant water treatment
●Drinking water filtration
●Oil&Gas water treatment
●Pharmaceutical water treatment
Specification
| Model | DFPESW20-91 | |
| Specification | Membrane material | PES |
| Housing material | UPVC | |
| Pore size(μm) | 0.02 | |
| Membrane area(m2) | 91 | |
| Potting material | Polyurethane resin | |
| Operation parameter | Max.chlorine concentration(ppm) | 200 |
| pH range during operation | 2 - 11 | |
| pH range during cleaning | 1 - 13 | |
| Max backwash pressure(Mpa) | 0.25 | |
| Operation pressure(Mpa) | 0.1~0.3 | |
| Operation mode | cross flow / dead end | |
| Max working temperature | 40℃ | |
| Design flux(LMH) | 50 - 150 | |
Related Products
Send Inquiry