Bolivia PTFE Filter Cartridge

Poly Pleat PTFE filter cartridge is constructed with 100% FDA compliant PTFE membrane and PP hardware, naturally hydrophobic PTFE makes it suitable for venting and aggressive chemical filtration process. It is thermally bonded and adhesive free. Every filter is pre-flushed and integrity tested before final assembly.

Category:

BoliviaMembrane Filter

Phone:400-888-8888

Inquire

Product Description

Poly Pleat PTFE filter cartridge is constructed with 100% FDA compliant PTFE membrane and PP hardware, naturally hydrophobic PTFE makes it suitable for venting and aggressive chemical filtration process. It is thermally bonded and adhesive free. Every filter is pre-flushed and integrity tested before final assembly.

Poly Pleat PTFE pleated filter cartridge meets U.S. FDA requirements for food contact under the applicable regulations in 21 CFR and the test criteria for USP Class VI-121C Plastics, strict quality control process makes sure minimal fibre migration.

Features

　　● FDA CFR 21 material

　　● Wide chemical compatibility

　　● 100% Integrity tested

　　● Hot water and steam sterilization allowed

　　● Replacement model for other vendors

Brand	Series
Pall	Emflon PFR
Millipore	Aervent
3M Cuno	LifeASSURE PFS
Parker	HIGH FLOW TETPOR II Air & Gas
Eaton	LOFMEM T
Suez	Memtrex absolute pleated
Amazon Filters	SUPAPORE TP
Graver Technologies	TefTEC V

Application

　　● Tank venting filter

　　● Chemical solvents

　　● Electronics industry

Materials of Construction
Filter Media	Hydrophobic PTFE
End Caps	Polypropylene
Core	Polypropylene
End Cap	222 Flat/222 Fin/226 Flat/226 Fin/DOE
O-Rings	Silicone/EPDM/Viton/NBR
Dimensions(Nominal)
Nominal Outside Diameter :	2.68inch/68±1(mm)
Nominal Inside Diameter	1.26inch/32（mm）
Micron Ratings	0.1μm,0.2μm,0.45μm,0.65μm, 1.0μm
Filtration Area	0.6m²(10’’)

Operating Condition
Maximum Temperature:	180℉ (82 ℃)
Maximum Pressure:	73psi (5bar) @ 68 ℉ (20 ℃)
Recommended change-out pressure:	35psi (2.4bar) @ 68 ℉ (20 ℃)