Bolivia Nylon filter cartridge

Poly Pleat Nylon filter cartridge is constructed with hydrophilic Nylon 66 membrane and PP hardware which makes it suitable for wide applications. It is manufactured in clean room with superior materials which allows for no fiber release and minimum extractables. Single layer membrane provides high flow rate and low pressure drop. PolyPleat NY66 membrane filter is 100% integrity tested before shipment.

Category:

BoliviaMembrane Filter

Phone:400-888-8888

Inquire

Product Description

Poly Pleat Nylon filter cartridge is constructed with hydrophilic Nylon 66 membrane and PP hardware which makes it suitable for wide applications. It is manufactured in clean room with superior materials which allows for no fiber release and minimum extractables. Single layer membrane provides high flow rate and low pressure drop. PolyPleat NY66 membrane filter is 100% integrity tested before shipment.

DELTA certifies that the material contained in PolyPleat NY66 pleated filters meet U.S. FDA requirements for food contact under the applicable regulations in 21 CFR.

Features

　　● Absolute rating performance

　　● Large filtration area

　　● 100% Integrity tested

　　● Easy wetting Nylon 66 membrane

　　● Steam sterilization available

Application

　　● Photoresist filtration

　　● Electronic Ultra Pure Water

　　● Chemical solvents

　　● Food and beverage

Regulation compliance

　　● Bacterial Endotoxin: Aqueous extraction of autocalved filter contains <0.25 EU/ml as by LAL test

　　● USP Class VI-121°C plastics

　　● Particle Shedding: Autoclaved filter effluent meet the USP<788>for large volume Injections.

　　● All materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.

Retrofit for Nylon membrane pleated filters from other vendors:

Brand	Series
Pall	Ultipor® N66
3M Cuno	LifeASSURE™ BLA Series
Porvair Filtration	Hydrofil™ Nylon 6.6
Suez	Memtrex NY
Eaton	LOFMEM N

Materials of Construction
Filter Media	Nylon 66
End Caps	Polypropylene
Core	Polypropylene
End Cap	222 Flat/222 Fin/226 Flat/226 Fin/DOE
O-Rings	Silicone/EPDM/Viton/NBR
Dimensions(Nominal)
Nominal Outside Diameter :	2.68inch/68±1(mm)
Nominal Inside Diameter	1.26inch/32（mm）
Micron Ratings	0.1μm,0.2μm,0.45μm,0.65μm, 1.0μm
Filtration Area	0.6m²(10’’)

Operating Condition
Maximum Temperature:	180℉ (82 ℃)
Maximum Pressure:	70psi (5bar) @ 68 ℉ (20 ℃)
Recommended change-out pressure:	35psi (2.4bar) @ 68 ℉ (20 ℃)