Retrofit For IntegraTec MB 55

With factory in Nantong city, Delta Filtration can deliver order very fast from nearby Shanghai port, OEM private label service is available.

Features

● 0.02μm pore size with high retention performance

● 1:1 replacement for DuPont IntegraTec MB 50

● Excellent chemical resistance

● Typical permeate SDI<3, turbidity <0.1NTU

Application

● Municipal water treatment

● RO pretreatment in desalination plant

● Boiler water and condensate water treatment

● Pharmaceutical wastewater treatment

Model		DFPES9055
Specification	Membrane material	PES
	Housing material	UPVC
	Pore size(μm)	0.02
	Membrane area(m2)	55
	Installation length(mm)	1901-1905
	Module diameter(mm)	220
	Connection size (Feed/Permeate/Concentrate)	Victaulic 2 1/2''
	Potting material	Epoxy resin
	Flow direction	Inside-out pressurized
Operation parameter	Max chlorine concentration(ppm)	500
	pH range	2 - 13
	Working temperature(℃)	5 - 40
	Max feed pressure(Mpa)	0.3
	Max backwash pressure(Mpa)	0.2
	Max trans-membrane pressure (Mpa)	0.2
	Backwash flow(L/H)	230 - 300
	Particle size	300μm

Send Inquiry

Contact

Category:

DuPont Inge Equivalent

Keywords:

Roll Membrane | High Flow Filter | PP Pleated Filter

Tel: +86-513-89157856
Email: sales@delta-filtration.com

Fluoro-Pure DELFLEX Series DFPES9055 Ultrafiltration module can work as economical replacement for DuPont IntegraTec MB 55 or IntegraTec MB 55V, naturally hydrophilic PES membrane contributes to high flow rate and capacity, it can be used in wide range of process applications including desalination plant, municipal water treatment, wastewater reuse etc. Model DFPES9055 Specification Membrane material PES Housing material UPVC Pore size(μm) 0.02 Membrane area(m2) 55 Installation length(mm) 1901-1905 Module diameter(mm) 220 Connection size (Feed/Permeate/Concentrate) Victaulic 2 1/2'' Potting material Epoxy resin Flow direction Inside-out pressurized Operation parameter Max chlorine concentration(ppm) 500 pH range 2 - 13 Working temperature(℃) 5 - 40 Max feed pressure(Mpa) 0.3 Max backwash pressure(Mpa) 0.2 Max trans-membrane pressure (Mpa) 0.2 Backwash flow(L/H) 230 - 300 Particle size 300μm

Product Description

With factory in Nantong city, Delta Filtration can deliver order very fast from nearby Shanghai port, OEM private label service is available.

Features

● 0.02μm pore size with high retention performance

● 1:1 replacement for DuPont IntegraTec MB 50

● Excellent chemical resistance

● Typical permeate SDI<3, turbidity <0.1NTU

Application

● Municipal water treatment

● RO pretreatment in desalination plant

● Boiler water and condensate water treatment

● Pharmaceutical wastewater treatment

Model		DFPES9055
Specification	Membrane material	PES
	Housing material	UPVC
	Pore size(μm)	0.02
	Membrane area(m2)	55
	Installation length(mm)	1901-1905
	Module diameter(mm)	220
	Connection size (Feed/Permeate/Concentrate)	Victaulic 2 1/2''
	Potting material	Epoxy resin
	Flow direction	Inside-out pressurized
Operation parameter	Max chlorine concentration(ppm)	500
	pH range	2 - 13
	Working temperature(℃)	5 - 40
	Max feed pressure(Mpa)	0.3
	Max backwash pressure(Mpa)	0.2
	Max trans-membrane pressure (Mpa)	0.2
	Backwash flow(L/H)	230 - 300
	Particle size	300μm

Related Products

Dow SFP-2880 2880XP Alternative

Fluoro-Pure DFP Series Ultrafiltration module is developed to replace Dow Ultrafiltration Membrane SFP 2880 with same dimensions and operation principle, compared with PES, PVC and PAN materials, PVDF has much better resistance to chemicals especially sodium hypochlorite-which is main chemical used for membrane cleaning.

Pentair X-Flow Aquaflex HP 55 Retrofit

Fluoro-Free DELFLEX Series Ultrafiltration module DFPES9055 model can work as economical replacement for Pentair Norit Aquaflex HP 55 with better cost effectiveness, no modification is required because of its compatible dimensions, DFPES9055 can well fit into original membrane systems. Hollow fiber UF module allows for larger loading capacity with same space, 0.02μm pore size contributes to good rejection to bacteria and virus, PES material has very good hydrophilic feature and less membrane fouling.

Hyflux Kristal K600B Retrofit

Fluoro-Pure D600ER Series UF filter is developed to replace Hyflux UF Membrane Kristal K600ER model, providing a more economical replacement solution and making sure retrofit module is 100% compatible with existing UF system.

IP-51XP IP-77XP Alternative

Fluoro-Pure DelPac Series Ultrafiltration module can be used as replacement for Dow IntegraPac membrane IP-51XP, IPD-51XP, IP-77XP and IPD-77XP series with compatible dimensions, PVDF hollow fiber UF membrane applies outside-in flow mode, it allows for wide range of feed water, making it a robust UF module.

Retrofit For Veolia ZW500D 600N Strength

Fluoro-Klean DELWED MBR membranes are direct replacement for Veolia ZW500D 340, ZW500D 370 and ZW500D 440 membrane modules with excellent 600N tensile strength, which is same as original membrane modules and there is no fiber breakage issue, 48M 52M MBR cassette is also available with stainless steel 316 material, each cassette can be equipped with 48, 50 and 52 modules, pulsed aeration technology contributes to less energy consumption and plant cost.

Ultrafiltration DFPVDFMAX60

Delta Filtration Ultrafiltration module DFPVDFMAX60 is equivalent to Hydranautics HYDRAcap MAX 60 UF membrane, with PVDF membrane of pore size 0.03μm, DFPVDFMAX60 can provide superior retention performance and offer log 4 rejection of Giardia cysts and Cryptosporidium oocysts.

Retrofit For 3M Liqui-Flux

Fluoro-Pure DFPESW10-75 Ultrafiltration module is made with hollow fiber Polyethersulfone(PES) membrane which is naturally hydrophilic and suitable for liquid filtration, it can be used to replace 3M MEMBRANA Liqui-Flux W10 Series UF membrane modules with better cost effectiveness.

Retrofit For XIGA XF40

DelGuard Series Ultrafiltration module is made with hollow fiber 100% Polyethersulfone(PES) membrane which is naturally hydrophilic and suitable for liquid filtration, it can be used to replace Pentair NORIT X-FLOW XIGA / SEAGUARD Series UF membrane modules in diverse applications including pretreatment for seawater SWRO desalination, drinking water treatment, injection water production, boiler feed water production etc.

Retrofit For Koch Targa II 10072-35

Delta Filtration PES Ultrafiltration module DFTGAPES10072 is equivalent to Koch Targa II 10072-35 ultrafiltration cartridge with same dimensions and equivalent performance, with 81㎡ large filtration area, it can be used in large water treatment plants with limited footprint, including mining industry, oil&gas, power plants etc.

Toray HFU-1020AN Membrane Equivalent

Fluoro-Pure DELFIL Ultrafiltration is developed to replace TORAY UF Membrane TORAYFIL series as a more economical replacement solution, 100% compatible with existing UF system, PVDF membrane and PVC housing structure provides good resistance to chlorine and strong acids, which allows for better chemical cleaning to recover membrane flux.

Retrofit For Litree Gemini-U MBR Module

Fluoro-Klean DFHFMBR-GMNU MBR membranes are alternative modules to Litree Gemini-U MBR membrane module with 31㎡ filtration area, this submerged membrane module is specially for sewage treatment process.

3M Liqui-Cel G520 G520R Alternative