Retrofit For HYDRAcap MAX80

Outside-in flow mode allows for less strict pretreatment of ultrafiltration membrane module, Pleat Plus P series high flow filters can effectively protect ultrafiltration modules with high quality filtrate in low turbidity and SDI.

Features

● 0.03 / 0.08μm pore size available

● Direct replacement for Hydranautics Ultrafiltration

● High tensile strength for membrane fibers

● Excellent chemical resistance by PVDF membrane

● Can be operated without backwash process

Application

●Desalination RO plant

●Boiler water and condensate treatment

●Drinking water filtration

●Wastewater reclamation

●Ultra pure water treatment

　Specification

Model		DFPVDFMAX80
Specification	Membrane material	Capillary PVDF
	Housing material	UPVC
	Pore size(μm)	0.03 / 0.08
	Membrane area(m2)	105
	L length(mm)	2340.6
	L1 length(mm)	2232.7
	L2 length(mm)	2110.9
	L3 length(mm)	172.00
	D1 diameter(mm)	250
	D2 diameter(mm)	290
	Connection size	2‘’ Victaulic
	Potting material	Epoxy resin
	Operating mode	Outside-inside
Operation parameter	Instantaneous chlorine concentration(ppm)	5,000
	Operation chlorine concentration(ppm)	2,000
	Max feed turbidity	300 NTU
	Operating pH range	2.0 - 11
	Cleaning pH range	1.0 - 13
	Max backwash pressure(Mpa)	0.2
	Max feed pressure(Mpa)	0.5
	Maximum air scour rate(Nm3/h)	15
	Air scour duration	120 - 240 s
	Air scour frequency	once every 20 - 60min
	Maintenance cleaning frequency	1 - 3 times/day
	Maintenance cleaning duration	20 - 30 min
	Cleaning chemicals	NaOH, HCl, Citric acid
	Design flux(LMH)	30 - 120
Filtrate quality	Turbidity	≤0.1 NTU
	Bacterial rejection	>4 log

Send Inquiry

Contact

Category:

Hydranautics Equivalent

Keywords:

Roll Membrane | High Flow Filter | PP Pleated Filter

Tel: +86-513-89157856
Email: sales@delta-filtration.com

Fluoro-Pure DELCAP Series Ultrafiltration module is made with hollow fiber PVDF which has good resistance to chemicals and high mechanical strength, it can be used to replace Hydranautics UF membrane HYDRAcap MAX 80 with large filtration area105㎡, which is good choice for large water treatment plants due to compact skid and small footprint. Outside-in flow mode allows for less strict pretreatment of ultrafiltration membrane module, Pleat Plus P series high flow filters can effectively protect ultrafiltration modules with high quality filtrate in low turbidity and SDI.

Product Description

Features

● 0.03 / 0.08μm pore size available

● Direct replacement for Hydranautics Ultrafiltration

● High tensile strength for membrane fibers

● Excellent chemical resistance by PVDF membrane

● Can be operated without backwash process

Application

●Desalination RO plant

●Boiler water and condensate treatment

●Drinking water filtration

●Wastewater reclamation

●Ultra pure water treatment

　Specification

Model		DFPVDFMAX80
Specification	Membrane material	Capillary PVDF
	Housing material	UPVC
	Pore size(μm)	0.03 / 0.08
	Membrane area(m2)	105
	L length(mm)	2340.6
	L1 length(mm)	2232.7
	L2 length(mm)	2110.9
	L3 length(mm)	172.00
	D1 diameter(mm)	250
	D2 diameter(mm)	290
	Connection size	2‘’ Victaulic
	Potting material	Epoxy resin
	Operating mode	Outside-inside
Operation parameter	Instantaneous chlorine concentration(ppm)	5,000
	Operation chlorine concentration(ppm)	2,000
	Max feed turbidity	300 NTU
	Operating pH range	2.0 - 11
	Cleaning pH range	1.0 - 13
	Max backwash pressure(Mpa)	0.2
	Max feed pressure(Mpa)	0.5
	Maximum air scour rate(Nm3/h)	15
	Air scour duration	120 - 240 s
	Air scour frequency	once every 20 - 60min
	Maintenance cleaning frequency	1 - 3 times/day
	Maintenance cleaning duration	20 - 30 min
	Cleaning chemicals	NaOH, HCl, Citric acid
	Design flux(LMH)	30 - 120
Filtrate quality	Turbidity	≤0.1 NTU
	Bacterial rejection	>4 log

Related Products

AQUAFLEX HP PVC 0.8mm

8" AQUAFLEX HP PVC 0.8mm UFCLE Ultrafiltration module is used for production of process and potable water as well as WWTP effluent, Delta Filtration DFPES9055 model can be used to replace Pentair AQUAFLEX HP PVC 0.8mm membrane with compatible dimensions which means no piping modification is required.

Retrofit For XIGA XF40

DelGuard Series Ultrafiltration module is made with hollow fiber 100% Polyethersulfone(PES) membrane which is naturally hydrophilic and suitable for liquid filtration, it can be used to replace Pentair NORIT X-FLOW XIGA / SEAGUARD Series UF membrane modules in diverse applications including pretreatment for seawater SWRO desalination, drinking water treatment, injection water production, boiler feed water production etc.

Hyflux Kristal K600B Retrofit

Fluoro-Pure D600ER Series UF filter is developed to replace Hyflux UF Membrane Kristal K600ER model, providing a more economical replacement solution and making sure retrofit module is 100% compatible with existing UF system.

IP-51XP IP-77XP Alternative

Fluoro-Pure DelPac Series Ultrafiltration module can be used as replacement for Dow IntegraPac membrane IP-51XP, IPD-51XP, IP-77XP and IPD-77XP series with compatible dimensions, PVDF hollow fiber UF membrane applies outside-in flow mode, it allows for wide range of feed water, making it a robust UF module.

IP-51 IP-77 Alternative

Fluoro-Pure DelPac Series Ultrafiltration module is developed to replace Dow IntegraPac membrane IP-51 and IP-77 cross flow ultrafiltration filter with compatible dimensions at much more economical price, compared with PES, PVC and PAN materials, PVDF has better tensile strength and much better resistance to chemicals especially sodium hypochlorite-which is main chemical used for membrane cleaning.

Retrofit For Veolia ZW500D 600N Strength

Fluoro-Klean DELWED MBR membranes are direct replacement for Veolia ZW500D 340, ZW500D 370 and ZW500D 440 membrane modules with excellent 600N tensile strength, which is same as original membrane modules and there is no fiber breakage issue, 48M 52M MBR cassette is also available with stainless steel 316 material, each cassette can be equipped with 48, 50 and 52 modules, pulsed aeration technology contributes to less energy consumption and plant cost.

Ultrafiltration DFPVDFMAX60

Delta Filtration Ultrafiltration module DFPVDFMAX60 is equivalent to Hydranautics HYDRAcap MAX 60 UF membrane, with PVDF membrane of pore size 0.03μm, DFPVDFMAX60 can provide superior retention performance and offer log 4 rejection of Giardia cysts and Cryptosporidium oocysts.

Retrofit For 3M Liqui-Flux

Fluoro-Pure DFPESW10-75 Ultrafiltration module is made with hollow fiber Polyethersulfone(PES) membrane which is naturally hydrophilic and suitable for liquid filtration, it can be used to replace 3M MEMBRANA Liqui-Flux W10 Series UF membrane modules with better cost effectiveness.

Retrofit For LG G-Brane P7 MR-MHP07A

Fluoro-Pure DELFIL Ultrafiltration model DFUFPVDF8575G is made with hollow fiber PVDF 75㎡ effective filtration area, it can work as economical replacement for LG G-Brane P7 MR-MHP07A and Synopex G-Brane P7 UF Membrane, typical working pressure is 3 bar. DFUFPVDF8575G UF module is produced with 0.1μm membrane fiber with excellent tensile strength, the module can be operated based on both cross-flow and dead-end mode, it can be used for drinking water process and wastewater reuse applications.

Retrofit VK-0094 Dizzer 5000plus

Fluoro-Pure DFPES700B-50 Ultrafiltration module is an economical replacement for Inge dizzer XL 5000plus(p/n: VK-0094), as an integrated membrane technology provider, we have strict quality control procedure and internal test to make sure Delta module provides equivalent performance to Inge brand.

Retrofit For DuPont IntegraTec MB 60

Delta Filtration DFPES700B-60 is developed as economical replacement for DuPont IntegraTec MB 60 with 100% compatible dimensions, with hydrophilic hollow fiber PES membrane material, DFPES700B-60 offers super high flow rate as well as good retention performance for bacteria, suspended solids and virus, 0.02μm pore size produces high quality permeate for drinking water, process water as well as pretreatment of reverse osmosis system.

PES Ultrafiltration Membrane DFPES9075

Fluoro-Pure DELFLEX Series Ultrafiltration module is made with hollow fiber Polyethersulfone(PES) membrane which is inside-out flow operation, available membrane areas are 40㎡ 55㎡ 64㎡ and 75㎡, DFPES9075 model is compatible with Pentair X-Flow XF75 model including accessories such as end caps, connectors, O-ring and clamps.