Retrofit For LG G-Brane P5 MR-MHP05A
Fluoro-Pure DELFIL Ultrafiltration model DFUFPVDF8550G is made with hollow fiber PVDF 50㎡ effective filtration area, it can work as economical replacement for LG ulrafiltration model G-Brane P5 MR-MHP05A and Synopex G-Brane P5 UF Membrane, typical working pressure is 3 bar.
DFUFPVDF8550G UF module is produced with 0.1μm membrane fiber with excellent tensile strength, the module can be operated based on both cross-flow and dead-end mode, it can be used for drinking water process and wastewater reuse applications.
Features
● Direct replacement for LG G-Brane P5
● Same operation principle as LG ultrafiltration
● High quality permeate flow
● Excellent chemical resistance
Application
● Pretreatment for RO desalination
● Food&Beverage water treatment
● Drinking water filtration
● Oil&Gas water treatment
● Ultra Pure Water production
|
Model |
DFUFPVDF8550G |
|
|
Specification
|
Membrane material |
PVDF |
|
Housing material |
UPVC |
|
|
Pore size(μm) |
0.1 |
|
|
Inner diameter(mm) |
0.7 |
|
|
Outer diameter(mm) |
1.2 |
|
|
Membrane area(m2) |
50 |
|
|
Overall length(mm) |
1,731 |
|
|
Module diameter(mm) |
216 |
|
|
Feed water/Air inlet |
DN80 |
|
|
Filtrate outlet |
DN80 |
|
|
Concentrate/Air outlet |
DN65 |
|
|
Potting material |
Epoxy resin |
|
|
Operation parameter
|
Max.chlorine concentration(ppm) |
5000 |
|
pH range |
1 - 10 |
|
|
Max backwash pressure(Mpa) |
0.2 |
|
|
Max feed pressure(Mpa) |
0.3 |
|
|
Suggested backwash flow(L/H) |
7,500 |
|
|
Air scour rate(Nm3/h) |
7.0 - 9.0 |
|
|
Design flux(LMH) |
30 - 150 |
|
Category:
LG Equivalent
Keywords:
Roll Membrane | High Flow Filter | PP Pleated Filter
Contact Us
Tel: +86-513-89157856
Email: sales@delta-filtration.com
Product Description
Fluoro-Pure DELFIL Ultrafiltration model DFUFPVDF8550G is made with hollow fiber PVDF 50㎡ effective filtration area, it can work as economical replacement for LG ulrafiltration model G-Brane P5 MR-MHP05A and Synopex G-Brane P5 UF Membrane, typical working pressure is 3 bar.
DFUFPVDF8550G UF module is produced with 0.1μm membrane fiber with excellent tensile strength, the module can be operated based on both cross-flow and dead-end mode, it can be used for drinking water process and wastewater reuse applications.
Features
● Direct replacement for LG G-Brane P5
● Same operation principle as LG ultrafiltration
● High quality permeate flow
● Excellent chemical resistance
Application
● Pretreatment for RO desalination
● Food&Beverage water treatment
● Drinking water filtration
● Oil&Gas water treatment
● Ultra Pure Water production
|
Model |
DFUFPVDF8550G |
|
|
Specification
|
Membrane material |
PVDF |
|
Housing material |
UPVC |
|
|
Pore size(μm) |
0.1 |
|
|
Inner diameter(mm) |
0.7 |
|
|
Outer diameter(mm) |
1.2 |
|
|
Membrane area(m2) |
50 |
|
|
Overall length(mm) |
1,731 |
|
|
Module diameter(mm) |
216 |
|
|
Feed water/Air inlet |
DN80 |
|
|
Filtrate outlet |
DN80 |
|
|
Concentrate/Air outlet |
DN65 |
|
|
Potting material |
Epoxy resin |
|
|
Operation parameter
|
Max.chlorine concentration(ppm) |
5000 |
|
pH range |
1 - 10 |
|
|
Max backwash pressure(Mpa) |
0.2 |
|
|
Max feed pressure(Mpa) |
0.3 |
|
|
Suggested backwash flow(L/H) |
7,500 |
|
|
Air scour rate(Nm3/h) |
7.0 - 9.0 |
|
|
Design flux(LMH) |
30 - 150 |
|
Related Products
Send Inquiry